The reflux bed wedge is a foam wedge, recommended for those suffering from reflux or breathing problems whilst sleeping. The foam wedge is of suitable premium quality 35-140 foam to be slept on directly, or placed under the mattress if preferred. 

This range of wedges is designed to elevate the upper body (on an angle of 7.2 degrees), while still allowing for lying on one's side as required. Please note that the height at the high end is 140mm and evenly slopes down to 10mm thickness at the low end.

For ease of handling, flexibility of use, and efficiency of transport the double, queen and king sizes are supplied in 2 pieces as shown. Covers are sewn using cotton or knitted bedding fabric as available. They are zipped, and so are removable for washing as required.

For King Single beds we recommend the single wedge, and for Single beds, both  the single and narrow single wedges are suitable options. 

• Narrow Single: 1025(L) x 760(W) x 140→10mm(H) 

• Single: 1025(L) x 900(W) x 140→10mm(H) 

• Double: 1025(L) x 1360(W) x 140→10mm(H) - supplied in two halves

• Queen: 1025(L) x 1520(W) x 140→10mm(H) - supplied in two Narrow Single halves

• King: 1025(L) x 1800(W) x 140→10mm(H) - supplied in two Single size halves

All of the above wedges have an angle of slope of 7.2 degrees. This can be a little too steep for some folks. Also see our less steep mattress elevator / .

WARRANTY These Mattress Elevator wedges will give many years of comfort and relief, and are fully guaranteed for three years of regular use.

INSTRUCTIONS for use. All new foam gives off some smell when removed from its packaging. Wedges, overlays, and new mattresses all can be left in the open to air for a day or two if the new foam smell is noticeable, or is likely to cause irritation. 

For reflux wedges custom cut to your specifications please contact us directly.